USB/PPI interface, Programming Cable for Siemens S7-200PLC and TP170 touch panel,

3 METERS, with Communication indicator, can replace 6ES7 901-3DB30-0XA0,the largest communication distance of up to 2 KM. Not support multi-master station communication.

Optoelectronic isolated USB/PPI adapter,  can replace:6ES7 901-3DB30-0XA0,the largest communication distance of up to 2KM.
Not support multi-master station communication.
3 METERS

RS232/PPI interface,Programming Cable for Siemens S7-200PLC or TP170 touch panel,

3 METERS,Can replace 6ES7 901-3CB30-0XA0.

Not support long distance communication and multi-master station communication.

Light Isolated PC / PPI cable, with the same function as PC/PPI, support 10 and 11 MODEM communication, with Communication indicator , Can replace 6ES7 901-3CB30-0XA0.

baud rate 0 ~ 115.2 Kbps and automatic adaptive, the largest communications range is 2km.

RS232/MPI ,support S7-300/400 PLC MPI or S7-200 PLC PPI communication.

S7-300/400PLC Programming adapters cable with isolated RS232 interfaces, RS232/MPI isolation, with communication indicator, to replace Siemens products: 6 ES7 972-0CA23-0XA0,

The communications rate of PC port is 19.2Kbps~115.2Kbps and can be automatically adapted, the communications rate of MPI port is 187.5Kbps and 19.2 Kbps and can be automatically adapted too. Can use PC / MPI + to connect PLC and the touch-screen of third-party manufacturers for communications.

USB/MPI+ V4.0 is the USB to MPI and PPI protocol adapter, support S7-300/400 PLC MPI or S7-200 PLC PPI communication. It’s the same as Siemens PC Adapter USB except . Its driver is the Siemens PC_Adapter_USB driver, and choose the USB port, not the COM port.USB/MPI+ V 4.0 is the optoelectronic isolated adapter FOR industrial design. There is antisurging & anti-lightning protection circuit FOR the USB and RS485 interface.

The Cable between RS232 and Siemens S5 SERIES PLC Programming interface(DB15),
Used FOR PLC Programming software and monitored control system FOR S5 SERIES,
3 METERS,
Can replace Siemens 6ES5 734-1BD20.

RS232 Cable for PC/MPI adapter,
3 METERS,
Correspond to Siemens 6ES7901-1BF00-0XA0.

Communication Cable between S7-200/300 PLC and Siemens touch panel,3 / 5  METERS,

correspond to Siemens 6ES7 901-0BF00-0AA0. MPI extension Cable

Programming Cable for Siemens OP all SERIES HMI

USB optoelectronic isolated Programming Cable
FOR Siemens LOGO!,2.5 METERS,with communication indicator.

RS232 optoelectronic isolated Programming Cable for FOR
Siemens LOGO!,3 METERS,
can replace Siemens 6ED1 057-1AA00-0BA0